|
6
SPEED EVOLUTION REBUILD SERVICE

The rebuild service for the Mitsubishi
EVOLUTION 6 speed corrects the common problems experienced with this
transmission and more.
Sticky shifting between gears
Blocking of shifts
Notchy shifting
Grinding during shifts
Noisy transmission
The 6 speed transmission was designed with a 260-290ft.lbs
torque fatigue limit. While this is roughly 100ft.lbs of torque lower than
the 5 speed transmission, there are several things that we do that
have proven to increase the durability and service life of this
transmission. This transmission service includes high intensity shot
peening of the gearset to increase the durability of the narrower gears that
are found in this transmission. If gearing is worn or damaged gearing will
be replaced with new revised parts. We have eliminated the lubrication problems
associated with the 6 speed by machining more oil passage ways which provide
increased oil flow to critical components. The transmission is specially built
to cope with higher torque and features
gear detail work to the lead edge and root diameter of the gear teeth. This
allows the gearsets to handle higher torque without failure.
The recommended clutch for the 6 speed should hold no
more than 400ft.lbs of torque. Hubs, sleeves, shift rails and shift assembly are polished for silky smooth shifting.
We recommend this service to those who have a 6 speed transmission.
Click here to learn more on how things get done at TRE.
6 SPEED EVOLUTION
REBUILD = starting at $1285.*
Typical "worst case scenario" repair for the 6 speed involves replacement of
the 3rd/4th
gearset and the loaded output shaft assembly. This rebuild will total $1800.
Warranty is 12
months. *click here for warranty info.*
To order please click here:
6 SPEED EVO TRANSMISSION REBUILD SERVICE
© 2010 TRE
|