|
HOW TO PREPARE
TRANSMISSION/TRANSFER CASE FOR SHIPMENT.
PLEASE PLEASE FOLLOW THESE IMPORTANT INSTRUCTIONS
1. Please write
your name & phone number on the transmission.
2.
Remove
these items from the transmission:
clutch fork, T.O. bearing, slave cylinder, transmission mounts/brackets, reverse
switch, speedometer pulse generator and ground wire. Leave the shifter
levers/assembly but remove the transmissions mounts & bracket.
* EVO
OWNERS DO NOT NEED TO REMOVE THESE ITEMS: THE CLUTCH FORK, T.O.
BEARING OR SHIFTER BRACKETS, BUT REMOVE THE OTHER STUFF PLEASE.*
3. PLEASE
BE SURE TO
DRAIN ALL OF THE OIL FROM THE TRANSMISSION. TIP TRANSMISSION ON SIDE TO REMOVE
ALL REMAINING OIL. PLACE TRANSMISSION IN THE SUPPLIED PLASTIC BAG.
UPS WILL NOT
BUY YOU A NEW TRANS IF THE BOX FAILED FROM OIL CONTAMINATION.
4. Please
be sure to fill out the info form that is provided. Include your full name, phone numbers, email
address, ship to address etc.. We will contact you through email or by telephone to discuss your
transmission's condition and the upgrades that we offer.
We will ship your
transmission back to you inside a box that is shot with Sealed Air
packaging foam. This foam is extremely tough and protects the transmission
from
damage.
Printer friendly version

Ship to:
TRE
508 EAST FRANK STREET
BASEMENT LEVEL
KALAMAZOO, MI. 49007
© 2007 TRE |