The new STAGE
3
is your best value bar none because you
are getting an all new OEM 1st-4th gearset and a new input shaft and new intermediate shaft. These are the main components that get worn out inside of a DSM transmission
that has over 100k miles on them. This transmission is
intended
for 600HP. This transmission features
gear
detail work that improves the durability of the transmission.
The entire gearset receives high intensity
shot peening to raise the ultimate strength of the
gearset,
increasing fatigue resistance by over 20-25% while reducing gear wear.
High
rpm shifts are not a problem because the engagement teeth are modified to
increase the window of opportunity.
Oil passageways are
enlarged to improve oiling and transmission also receives other important
upgrades: double synchro 2nd gear, new 3rd and 4th gears, new HD Cryo'd
intermediate shaft, center differential Torrington bearing upgrade, high
tension synchro springs and the tough 3rd/4th shift fork. This is an excellent rebuild where you're getting
the most new parts.
Click here
for more info.
The parts replaced in
a STAGE 3 exchange:
See all the parts replaced
